Brand
- AquaLight 9
- AVACHLON 1
- Bangtec 4
CanatureCanature 10- Clack 1
- CNP 6
- Dupont 1
- ENH 10
- EWP 25
- EXLEN 1
- Filmtec 1
- First line 1
- HiDrop 1
Jiang beiJiang bei 4
KeensenKeensen 1
LeoLeo 12- Martin 9
RunxinRunxin 8
SekoSeko 1
VontronVontron 17
GAC-2510, Granular Activated Carbon Drinking Water Filter Cartridge
In stock
LKR 620.00- Effective bad taste & odor and chlorine taste & odor reduction
- Designed for maximum adsorption
- Choice of high-grade coconut shell-based, nutshell-based, or coal-based activated carbon
- Reducing contains organic chemicals, such as EDB, TCE, THM’s
- Long Service life
- Low pressure drops
- Filter media:
- Granular activated carbon choice of Coconut shell-based carbon
- Nutshell based carbon
- Or Coal based carbon
- Outer casing: Polypropylene
- Core: Polypropylene
- End caps: Polypropylene
- Gaskets: Buna-N
GAC-2520, Granular Activated Carbon Drinking Water Filter Cartridge
In stock
LKR 1,900.00- Filter Type: Granular Activated Carbon (GAC)
- Material: Polypropylene
- Diameter: 2.5 inches
- Length: 20 inches
- Flow Rate: 1 GPM
- Filtration Function: Reduces chlorine, taste, odor, and organic impurities
Granular Activated Carbon Filter Cartridge – 20 inch , 4.5 inch Diameter
In stock
Call for Price- Filter Type: Granular Activated Carbon (GAC)
- Material: Polypropylene
- Diameter:4.5Â inches
- Length: 20 inches
- Filtration Function: Reduces chlorine, taste, odor, and organic impurities
High TDS Series HT3-2012-100
In stock
LKR 5,670.00- Model / Size: 11.73″ × 1.89″ (290 mm × 48 mm) – standard 2012 RO membrane
- Rated Permeate Flow: 100 GPD (0.38 m³/day)
- Stable Salt Rejection: 98 %
- Membrane Type: High TDS Thin-Film Composite (TFC)
- Application: Residential and small commercial RO systems, suitable for water with moderate to high TDS
Inline Mineral Filter Cartridge
In stock
LKR 720.00- Product Type: Inline Mineral Filter Cartridge
- Media / Mineral Material: Mineral infusion media
- Diameter: ~2.5 inches (standard inline size)
- Length: ~10 inches (standard inline size)
- Filtration Function: Enhances drinking water by reintroducing essential minerals for improved taste and balanced quality after RO purification
Keensen 4040 Brackish Water RO Membrane
In stock
Call for Price- Brand: Keensen
- Model: BW-4040XLFR / BW-4040FR
- Membrane Type: Fouling Resistant Brackish Water Reverse Osmosis Membrane
- Element Size: 4″ × 40″ (4040 Standard Industrial Membrane)
- Rated Permeate Flow: ~2300 GPD (≈ 8.7 m³/day)
- Average Salt Rejection: ~99.6%
- Minimum Salt Rejection: ≥ 99.0%
- Active Membrane Area: ~85 ft² (≈ 7.9 m²)
- Test Pressure: 225 psi (≈ 1.55 MPa / 15.5 bar)
- Test Temperature: 25 °C
LEO AJm75S Pump
In stock
LKR 73,130.00- Brand: LEO
- Model: AJm75S
- Pump Type: Self-Priming Jet Pump
- Rated Power: 0.75 kW (1 HP)
- Voltage: 220–240 V / 50 Hz
- Phase: Single Phase
- Maximum Flow Rate: ~50 L/min
- Maximum Head: ~50 m
- Maximum Suction Lift: Up to 9 m
- Pump Body Material: Cast Iron
- Impeller Material: Brass
- Shaft Material: Stainless Steel (SS304)
- Mechanical Seal: Ceramic / Carbon
- Inlet Size: 1 inch
- Outlet Size: 1 inch
- Liquid Temperature Range: 0°C to 40°C
- Ambient Temperature: Up to 40°C
- Protection Class: IPX4
- Insulation Class: Class B
- Typical Applications: Domestic water supply, booster systems, RO feed pump, garden irrigation, small industrial water supply
LEO ECHm2-60 Pump
In stock
LKR 71,070.00- Brand: LEO
- Model: ECHm 2-60
- Pump Type: Horizontal Multistage Centrifugal Pump
- Rated Flow Rate: Up to ~60 L/min (≈3.6 m³/h)
- Maximum Head: Up to ~60 m
- Number of Stages: 6 Stages (Multistage Design)
- Motor Power: ~0.75 kW (1 HP)
- Power Supply: 220 V / 50 Hz / Single Phase
- Inlet / Outlet Size: 1″ × 1″ (25 mm)
- Maximum Suction Lift: ~8 m
- Maximum Working Pressure: ~10 bar
- Maximum Liquid Temperature: +40 °C (pump), up to +85 °C (liquid inside motor system)
- Pump Body Material: Cast Iron with Stainless Steel Components
- Impeller Material: Stainless Steel (AISI 304)
- Shaft Material: Stainless Steel (AISI 304)
- Mechanical Seal: Carbon / Ceramic Seal
- Motor Winding: 100% Copper Winding
- Protection Class: IP44
- Insulation Class: Class F
- Liquid pH Range: 4 – 10
- Typical Applications:
- Water booster systems
- RO system feed pump
- Domestic and commercial water supply
- Irrigation and gardening systems
- Industrial water transfer
- Pressure boosting for pipelines
LEO EMHm 2-6 Pump
In stock
LKR 80,340.00- Brand: LEO
- Model: EMHm 2-6
- Pump Type: Horizontal Multistage Centrifugal Pump
- Rated Flow Rate: ~1.0 – 4.5 m³/h
- Maximum Head: ~40 m
- Number of Stages: 6
- Motor Power: ~0.55 kW (0.75 HP)
- Voltage: 220 V / 50 Hz
- Phase: Single Phase
- Pump Body Material: Stainless Steel
- Impeller Material: Stainless Steel
- Shaft Material: Stainless Steel (AISI 304)
- Mechanical Seal: Ceramic / Carbon
- Inlet Size: 1 inch
- Outlet Size: 1 inch
- Maximum Suction Lift: ~7 m
- Maximum Working Pressure: ~10 bar
- Maximum Liquid Temperature: 60°C
- Ambient Temperature: Up to 40°C
- Protection Class: IPX4
- Insulation Class: Class F
- Typical Applications: Water booster systems, RO feed pump, domestic and commercial water supply, irrigation, industrial water circulation
LEO Multistage high pressure EVP 2-11 pump
In stock
Call for PriceBrand: LEO
Model: EVP 2‑11
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 11
Maximum Head: ~110 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (standard)
- Full Stainless Steel options available (model dependent)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~1.5 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (Single‑phase optional)
Inlet / Outlet Size: DN25 / 1″
Maximum Working Pressure: ~16-20 bar
Maximum Fluid Temperature: 0 – 60°C
Protection Class: IP55
Installation Type: Vertical inline mounting
LEO Multistage high pressure EVP 2-13 pump
In stock
Call for PriceBrand: LEO
Model: EVP 2‑13
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 13
Maximum Head: ~130 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (standard)
- Full Stainless Steel construction (optional depending on variant)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~2.2 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase optional)
Inlet / Outlet Size: DN25 / 1″
Maximum Working Pressure: ~20-22 bar
Maximum Fluid Temperature: 0 – 60°C
Protection Class: IP55
Installation Type: Vertical inline mounting
LEO Multistage high pressure EVP 2-17 pump
In stock
Call for PriceBrand: LEO
Model: LVR 2‑17
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 17
Maximum Head: ~170 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (standard)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~3.0 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase optional)
Inlet / Outlet Size: DN25 / 1″
Maximum Working Pressure: ~25-28 bar
Maximum Fluid Temperature: 0 – 60°C
Installation Type: Vertical inline mounting
LEO Multistage high pressure EVP 2-9 pump
In stock
Call for Price
Brand: LEO
Model: EVP 2‑9
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 9
Maximum Head: ~90 m
Pump Body Material:
- Stainless Steel / Cast Iron (model specific)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~1.1 kW (depending on variant)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase variants available)
Connection Size: DN25 / 1″ inlet & outlet
Max Working Pressure: ~16 bar
Max Fluid Temperature: 0 – 60°C
LEO Multistage high pressure LVR 2-11 pump
In stock
Call for PriceBrand: LEO
Model: LVR 2‑11
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 11
Maximum Head: ~110 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (or full Stainless Steel option)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~1.5 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (Single‑phase optional)
Inlet/Outlet Size: DN25 / 1″
Maximum Working Pressure: ~16-20 bar
Maximum Fluid Temperature: 0 – 60°C
Installation Type: Vertical inline mounting
LEO Multistage high pressure LVR 2-13 pump
In stock
Call for PriceBrand: LEO
Model: LVR 2‑13
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 13
Maximum Head: ~130 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (standard)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~2.2 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase optional)
Inlet / Outlet Size: DN25 / 1″
Maximum Working Pressure: ~20-22 bar
Maximum Fluid Temperature: 0 – 60°C
Installation Type: Vertical inline mounting
LEO Multistage high pressure LVR 2-17 pump
In stock
Call for PriceBrand: LEO
Model: LVR 2‑17
Pump Type: Vertical Multistage Centrifugal Pump
Nominal Flow Rate: ~2 m³/h
Number of Stages: 17
Maximum Head: ~170 m
Pump Body Material:
- Cast Iron with Stainless Steel Impellers (standard)
Impeller Material: Stainless Steel
Shaft Material: Stainless Steel
Motor Power: ~3.0 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase optional)
Inlet / Outlet Size: DN25 / 1″
Maximum Working Pressure: ~25-28 bar
Maximum Fluid Temperature: 0 – 60°C
Installation Type: Vertical inline mounting
LEO Multistage high pressure LVR 2-9 pump
In stock
Call for Price
Brand: LEO
Model: LVR 2‑9
Pump Type: Vertical Multistage Centrifugal Pump
Flow Rate: ~2 m³/h (nominal)
Number of Stages: 9 stages
Maximum Head: ~90 m
Material:
- Pump Body: Cast iron / Stainless steel options
- Impellers: Stainless steel
- Shaft: Stainless steel
Motor Power: ~1.1 kW (model dependent)
Power Supply: 380V / 3‑Phase / 50 Hz (single‑phase optional)
Inlet / Outlet Size: DN25 (1″)
Maximum Working Pressure: ~16 bar
Maximum Liquid Temperature: 0 – 60°C
Installation Type: Vertical inline mounting
Line Mount Flow Meters
In stock
LKR 18,750.00- Product Type: Line Mount Flow Meter
- Mounting Style: In-line installation directly on the pipeline
- Function: Measures real-time liquid flow rate
- Display: Clear analog (rotameter type) or digital indication (model dependent)
- Flow Range: Available in multiple flow ranges to suit system requirements
- Connection: Standard threaded or flanged connections (e.g., 1/2″, 3/4″, 1″)
- Material: Durable body suitable for water and compatible liquids
Lockable Valve
In stock
LKR 1,600.00- Product Type: Lockable control valve with integrated locking provision
- Function: Allows flow control while preventing accidental or unauthorized opening and closing
- Locking Feature: Built-in handle design suitable for padlock installation (lock open or lock closed position)
- Material: Manufactured from durable, corrosion-resistant materials such as brass, stainless steel, or reinforced polymer (model dependent)
- Connection Type: Standard threaded or flanged connections for easy integration into piping systems
- Application: Ideal for water treatment systems, RO plants, plumbing lines, industrial utilities, and safety-critical installations
- Benefits: Enhances operational safety, improves system security, reduces risk of leakage, and ensures stable system operation
LP21-4040 RO Membrane
In stock
LKR 46,350.00- Model: Vontron LP21-4040 (4″ × 40″) Reverse Osmosis Membrane Element (Low Pressure Series) – suitable for brackish and less saline feed water.Â
- Permeate Flow: High permeate production ~2400–2800 GPD (≈9.1–10.6 m³/day) under standard test conditions
- Stable Salt Rejection: ~99.5–99.6 % (excellent contaminant removal performance).Â
- Material / Technology: Thin-film composite (aromatic polyamide) membrane for robust RO desalination performance.Â
- Application: Industrial, commercial and high-demand drinking water purification systems where standard 4040 elements are required.